Аксесуари та кріплення для сигналізації
The 3-pin 2000mAh battery is designed as a backup power source for Ajax devices during mains power loss. It installs inside the enclosure and connects via a standard 3-pin connector. The battery supports stable operation of hubs and repeaters in standby mode. Compatible with multiple Ajax models.
TP-Link Tapo A201 is a solar panel designed to power Tapo battery-powered security cameras. It provides continuous charging using sunlight and reduces the need for manual recharging. The adjustable swivel mount allows optimal angle positioning for better light absorption. IP65 weather protection ensures reliable outdoor operation. Flexible installation is supported by a long power cable.
The Ajax 220V PSU (Power Supply Unit) is specifically designed for the Hub board, providing reliable power to the Ajax security system. It is responsible for supplying the necessary electrical power to the Hub, ensuring its proper functioning.
The DummyBox is a case designed to simulate the Ajax SpaceControl key fob. It provides a visual effect of a functional device, enhancing security by deterring potential intruders. Made of high-quality impact-resistant plastic, the DummyBox replicates the size and design of the original key fob. This is an ideal solution for creating a psychological barrier without investing in a functional device.
779 грн
696 грн
The Ajax PSU 12V power supply board connects Hub, Hub Plus, and ReX to low-voltage DC sources. It ensures stable system operation in areas without standard power supply. The board is installed inside the device housing, replacing the default 110/230 V module.
4 799 грн
3 460 грн
The Ajax EN54 I/O Module 2×2 Jeweller is a wireless addressable input/output module designed for integrating third-party wired devices into the Ajax EN54 fire alarm system. The module is equipped with two inputs for receiving signals from external devices (such as manual call points, sprinklers, magnetic contacts, or external detectors) and two relay outputs (dry contacts) for controlling evacuation systems, smoke extraction, emergency lighting, and other fire safety actuators.
4 799 грн
3 460 грн
The Ajax EN54 I/O Module 2×2 Jeweller is a wireless addressable input/output module designed for integrating third-party wired devices into the Ajax EN54 fire alarm system. The module is equipped with two inputs for receiving signals from external devices (such as manual call points, sprinklers, magnetic contacts, or external detectors) and two relay outputs (dry contacts) for controlling evacuation systems, smoke extraction, emergency lighting, and other fire safety actuators.
2 899 грн
2 168 грн
The Ajax EN54 Internal Battery (24h) is a high-reliability lithium-ion backup power module, engineered to deliver continuous operation of Ajax Fire Hub and Fire ReX devices for up to 24 hours in the event of mains power loss. Designed in line with EN54 system requirements, this battery ensures system resilience in critical fire safety applications.
2 899 грн
2 168 грн
The Ajax EN54 Internal Battery (24h) is a high-reliability lithium-ion backup power module, engineered to deliver continuous operation of Ajax Fire Hub and Fire ReX devices for up to 24 hours in the event of mains power loss. Designed in line with EN54 system requirements, this battery ensures system resilience in critical fire safety applications.
4 499 грн
3 268 грн
The Ajax EN54 Internal Battery (72h) white is an internal lithium-ion backup battery specifically designed to provide emergency power supply for the Ajax EN54 Fire Hub Jeweller and Fire ReX Jeweller devices. This battery ensures uninterrupted autonomous operation of the system for up to 72 hours in the event of a power outage, which is critical for maintaining fire safety in facilities with strict reliability requirements.
4 499 грн
3 268 грн
The Ajax EN54 Internal Battery (72h) Black is an internal lithium-ion backup battery specifically designed to provide emergency power supply for the Ajax EN54 Fire Hub Jeweller and Fire ReX Jeweller devices. This battery ensures uninterrupted autonomous operation of the system for up to 72 hours in the event of a power outage, which is critical for maintaining fire safety in facilities with strict reliability requirements.
The DummyBox for Ajax HomeSiren is a dummy housing that mimics the appearance of the HomeSiren alarm. It is used for demonstration purposes or as a decorative element in security systems where functionality is not required. Made from high-quality plastic, the housing fully replicates the design of the active alarm.
The DummyBox for Ajax DoorProtect in black is a mock-up designed to simulate the presence of a wireless door or window opening detector in the Ajax security system. It is used to deter potential intruders by creating the appearance of an active security system.
The SmartBracket mounting panel ensures secure installation of Ajax DoorProtect and DoorProtect Plus sensors. Made of durable plastic, it features a perforated area for tamper activation in case of unauthorized removal.
839 грн
786 грн
The Ajax external antenna is designed to boost the signal in security systems such as Hub 2, Hub 2 Plus, and the ReX 2 repeater. It provides a stable connection with devices over long distances, maintaining high-quality data transmission through the Jeweller radio frequency channel.
1 059 грн
942 грн
Ajax JunctionBox is a mounting box designed for the installation of Ajax surveillance cameras. It provides reliable protection for connections from adverse weather conditions, dust, and mechanical damage. The JunctionBox allows for the concealment of wires and connectors, making the installation of cameras neat and aesthetically pleasing.
569 грн
570 грн
With the introduction of the Outlet Type F Jeweller smart built-in outlet into the Ajax system, users have a variety of options that manifest themselves in a variety of automation scenarios. Outlets can now be automatically controlled according to a schedule, turned off when a fire alarm occurs or when a security system is activated. In addition, outlets can be integrated with LightSwitch smart switches.
Button for Ajax SoloButton 1-gang 2-way for LightSwitch, Jeweler, wireless, white
Article:
000029790
319 грн
384 грн
Button for Ajax SoloButton 1-gang 2-way for LightSwitch. With the introduction of LightSwitch into the Ajax ecosystem, users of the system have gained the ability to control various lighting devices both on-site and remotely through Ajax applications. The LightSwitch is a prefabricated device consisting of an internal mechanism, a transparent frame and a colored faceplate. It is the front panel that takes on the main role when it comes to creating an interior design of a house, apartment or office space.
159 грн
270 грн
Holder helps to install the panic button where it will be rapidly accessible in an emergency and makes using the remote control for scenarios even more convenient. The wireless device will remain portable: the button can be quickly detached from the holder and used as a key fob.
2 459 грн
2 048 грн
Ajax Manual Call Point is a wireless manual alarm activation button that allows you to activate the alarm in an emergency situation. A special tool (key) included in the package is used to reset the button. This device is intended for indoor installation only.
The Tiandy TC-P54BM is a mounting junction box specifically designed for installing dome and bullet cameras from the Tiandy brand. With its universal design, it allows for clean concealment of cables, connectors, and power supplies inside the enclosure, ensuring a neat appearance and protection against external factors. Made from white-coated aluminum alloy, the box is suitable for both indoor and outdoor installations.