Телекомунікаційні шафи і стійки ZPAS
ZPAS 19" Mounting Panel, 18U (WZ-0750-10-06-000) — a vertical mounting surface for installing equipment inside the cabinet. It attaches to vertical 19" rails. Made of 2.0 mm Aluzinc (Al-Zn) coated sheet steel. Supplied with fixing hardware.
73 700 грн
56 286 грн
The ZPAS SZB IT 42U 800×1000 mm server cabinet with single-leaf perforated doors provides reliable placement for 19" equipment. With up to 86% ventilation and a load capacity of 1500 kg, it is ideal for data centers and server rooms.
ZPAS 19" shelf, 1U, retractable, 350-450 mm deep, black (WZ-5841-25-01-350-161) is designed for installation in 19" server and telecommunications cabinets.
The ZPAS 19" shelf, 1U, adjustable in depth from 350 to 600 mm in gray (RAL 7035) is designed for installation in server and network cabinets. It can withstand loads of up to 150 kg and ensures reliable installation of equipment thanks to 4-point fixation.
The ZPAS 19" pull-out shelf, 2U, 455 mm deep in black (RAL 9005) is designed for installation in 19" server and telecom cabinets. Made of powder-coated steel, it provides easy access to equipment and mounts on two pairs of rails.
The ZPAS 19" 36U floor-standing dual-frame rack, 800 mm deep (black, RAL 9005) is designed for mounting 19" server and telecom equipment. It supports loads of up to 250 kg with even distribution.
3 516 грн
2 743 грн
The ZPAS 19" tabletop for SJB cabinet 600х600 mm (Calvados color) is made of 18 mm laminated MDF board. It provides a convenient working surface and an aesthetic finish for the cabinet.
The ZPAS SZB IT 24U 600×800 mm server cabinet with single-leaf perforated front and rear doors ensures secure housing for 19" equipment. With up to 80% ventilation and a load capacity of 1000 kg, it is an excellent choice for server rooms and telecom facilities.
71 500 грн
54 544 грн
The ZPAS SZB IT 42U 800×1000 mm server cabinet with single-leaf perforated doors provides reliable placement for 19" equipment. With up to 86% ventilation and a load capacity of 1500 kg, it is ideal for data centers and server rooms.
76 900 грн
58 638 грн
The ZPAS 19", 42U, SZB IT cabinet is a server cabinet with front single-pane perforated doors and rear double-leaf doors, measuring 600x1200 mm. It has a maximum load capacity of up to 1500 kg and is finished in black.
The ZPAS 19" 1U sliding shelf, depth 450–550 mm, black (WZ-5841-25-03-550-161), is designed for use in standard 19-inch server and telecom racks.
1 950 грн
1 453 грн
The ZPAS WN-0201-01-00-000/A is a DIN-rail mountable disconnect thermostat for heaters. Operates at 220V AC with up to 6A load.
9 084 грн
7 355 грн
The ZPAS SZE2 2000×400 mm side panels (WZ-1951-09-13-011) come as a set of two insert panels, providing equipment protection and a neat finish for enclosures.
The ZPAS 19" support angle (depth 600 mm) W-SB00-27-02-000 provides additional support and stability for equipment in server racks. Designed for heavy devices.
The ZPAS 19" support angle (depth 800 mm) W-SB00-27-01-000 provides additional stability and secure mounting of equipment in server racks. Ideal for heavy devices.
1 626 грн
1 324 грн
ZPAS 19" 0.5U shelf — a compact, heavy-duty mounting solution for equipment up to 70 kg in server and network cabinets.
ZPAS 150 mm swivel castors without brake — a convenient mobility solution for telecom racks that don’t require locking.
1 280 грн
1 044 грн
Set of 2 swivel castors ZPAS 150 mm with brake — a reliable solution for moving server racks and equipment.
1 450 грн
1 165 грн
The ZPAS WZ-8264-80-04-550-011 is a 19" 0.5U high fixed shelf designed for four-point mounting with adjustable depth from 550 to 650 mm. Made of durable sheet steel, it can withstand loads of up to 70 kg and is compatible with telecommunications and server cabinets.
44 600 грн
34 098 грн
ZPAS 19", 18U IT cabinet, 600x800 mm, black (W-IT-186080-69AA-2-161FB) — a spacious and durable solution for housing up to 1000 kg of server and networking equipment. The cabinet features glass front doors with metal frame and lock, steel rear doors, removable side panels with locks, and two pairs of adjustable 19" mounting rails.
33 690 грн
26 364 грн
ZPAS 19", 18U telecommunication cabinet, 600x800 mm, black (W-IT-186080-69AA-2-161FB) is a robust solution for housing up to 1000 kg of server and networking equipment. The modular steel frame comes disassembled for easy transport.
ZPAS 18U profile set for Z-CUBE enclosures, 2 pieces W-8180-40-05-000, includes two mounting profiles and fasteners. It is made of aluzinc-coated sheet steel for durability and corrosion resistance.
The ZPAS W-ZCUBE-17-18-011 rear panel is designed for 18U Z-CUBE series telecommunication cabinets. Made from durable metal, it ensures reliable equipment protection, improves structural rigidity, and limits rear access to the cabinet. Its high-quality grey finish resists scratches and corrosion.
ZPAS 19”, 18U, SZB IT is designed for reliable placement of server equipment in modern data centers. It has perforated front and rear doors for optimal airflow, which ensures efficient cooling of equipment. It can withstand loads of up to 1000 kg, making it an ideal choice for heavy equipment.
ZPAS 19”, 18U, SZB IT is designed for reliable placement of server equipment in modern data centers. It has perforated front and rear doors for optimal airflow, which ensures efficient cooling of equipment. It can withstand loads of up to 1000 kg, making it an ideal choice for heavy equipment.
59 460 грн
47 381 грн
The 19" 42U SZB IT cabinet is designed for secure and efficient server equipment storage in modern data centers. It features perforated front and rear doors to ensure optimal airflow, promoting effective cooling of the hardware. With a load capacity of up to 1500 kg, it is an excellent choice for heavy equipment.
17 838 грн
14 031 грн
ZPAS 19”, 12U, Z-BOX is designed for indoor use. The cabinet construction is based on a prefabricated frame (consisting of three frames), top and bottom plates, side walls, rear wall and front door.
16 866 грн
13 552 грн
ZPAS 19”, 10U, Z-BOX is designed for indoor use. The cabinet construction is based on a prefabricated frame (consisting of three frames), top and bottom plates, side walls, rear wall and front door.
24U high channel for 60 mm wide PVC channel type M1O-02-0031. The channel is supplied with fixing elements for installation in the enclosure.
25 950 грн
19 270 грн
ZPAS 19‘’ floor standing double-frame 42U rack with a depth of 800 mm in black colour. Load capacity: up to 250kg evenly loaded.
18 384 грн
14 336 грн
ZPAS 19'' floor standing double-frame 24U rack with a depth of 800 mm in black color. Load capacity: up to 250 kg of even load.
Rollers for enclosures - type 300. For enclosures: SZB IT, DSR IT, SZE2 PC. For one enclosure, 2 castors with brake and two without brake are used, as well as adapter plates for their attachment.
4-point locking shelves - 19-inch mounting with adjustable mounting depth. Mounts on two pairs of mounting profiles at 19-inch spacing.
6-point fixation shelves - attachment to the side surface of the mounting profiles. Mounting on three pairs of mounting profiles at a distance of 19 inches (attaching to the side holes of the mounting profiles).
2 166 грн
1 818 грн
Metal cable rings 66х66, set of 5 pcs. For cable harnesses in server cabinets and racks.
Metal cable rings 88x88, set of 5 pcs. For cable harnesses in server cabinets and racks.
Metal cable rings 66x66, set of 5 pcs. For cable harnesses in server cabinets and racks.
44 800 грн
35 100 грн
Telecommunication cabinet with glass door. Supplied unassembled in three cardboard boxes.
22 100 грн
17 310 грн
Designed for indoor use. The cabinet construction is based on a welded enclosure with a glazed front door and two removable side panels. The top and bottom panels have holes for cable glands (break-out plugs) and openings for fan installation.
Thermostats with normally closed and normally open electrical circuits are temperature controllers that manage the operation of ventilation and heat exchange systems, as well as activate an alert system when the allowable temperature range is exceeded.
4-point locking shelves - 19-inch mounting with adjustable mounting depth. Mounts on two pairs of mounting profiles at 19’ spacing.
19 300 грн
15 033 грн
The ZPAS power distribution unit with a nominal current of 32A is equipped with 20 C13 outlets and 4 C19 outlets. The unit has a 3-meter cable with an IEC 60309 plug, commonly used for industrial power supply. This device is suitable for use in server racks and other situations where power distribution among different devices is needed.
16 600 грн
12 986 грн
Designed for indoor use. Available in 2 depth options (450 mm and 600 mm) and 6 height options (from 6 to 21 U). The 450 mm deep cabinet can be upgraded with an additional body attached to its rear panel with two or three hinges and a lock. This creates a two-section cabinet with a total depth of 600 mm.
82 000 грн
62 470 грн
The ZPAS 19", 45U, SZB IT cabinet is a server cabinet with front single-pane perforated doors and rear double-leaf doors, measuring 600x1200 mm. It has a maximum load capacity of up to 1500 kg and is finished in black.
36 200 грн
27 670 грн
Telecommunications cabinet with glass doors. Supplied in disassembled form in three cardboard boxes. The frame, side panels, and doors are powder-coated in gray (RAL 7035) or black (RAL 9005). Mounting and horizontal profiles have an aluzinc (Al-Zn) coating.
36 500 грн
24 927 грн
Telecommunications cabinet with glass doors. Supplied in disassembled form in three cardboard boxes. The frame, side panels, and doors are powder-coated in gray (RAL 7035) or black (RAL 9005). Mounting and horizontal profiles have an aluzinc (Al-Zn) coating.
33 200 грн
25 406 грн
Telecommunications cabinet with glass doors. Supplied in disassembled form in three cardboard boxes. The frame, side panels, and doors are powder-coated in gray (RAL 7035) or black (RAL 9005). Mounting and horizontal profiles have an aluzinc (Al-Zn) coating.
21 400 грн
16 396 грн
Designed for indoor use. The cabinet's structure consists of an assembly frame (comprising three frames), top and bottom panels, side walls, a back panel, and front doors. The cabinet is equipped with two 19" mounting profiles with adjustable depth positioning. The load of all equipment mounted in the cabinet is distributed across its supporting frame. The top and bottom panels, side walls, and doors of the cabinet can be installed or removed even when the cabinet is fully assembled and mounted on the wall.
49 302 грн
38 409 грн
Universal telecommunication cabinet ZPAS IT-426080-44AA-1-161-FP 19" is equipped with a glass door and has a useful height of 42U.
50 490 грн
40 369 грн
Universal telecommunication cabinet ZPAS IT-428080-42AA-2-011-FP 19" is equipped with a perforated door and has a usable height of 42U. The product is an ideal solution for network installations in office premises.
57 732 грн
44 724 грн
Universal floor cabinet 19, 42U Zpas WZ-IT-426010-69AA-4-011-FP is designed to accommodate standard network equipment and servers.
23 400 грн
17 833 грн
Designed for indoor use. The cabinet is based on a prefabricated frame (consisting of three frames), top and bottom plates, side walls, back wall and front door.
Plastic cable organiser.
17 700 грн
13 857 грн
Designed for indoor use. The cabinet is based on a prefabricated frame (consisting of three frames), top and bottom plates, side walls, back wall and front door.
708 грн
636 грн
Cable organiser with rings is designed for horizontal cable management in 19’ cabinets and racks.
4-point locking shelves - 19” mounting with adjustable mounting depth. Manufactured from sheet steel.
4-point locking shelves - 19” mounting with adjustable mounting depth. Manufactured from sheet steel.
Cable organisers with perforated channel are designed for horizontal cable management in 19’ cabinets and racks. The back of the organiser has cable entry holes and the front cover is removable.
65 100 грн
48 905 грн
The ZPAS 19", 42U, SZB IT cabinet is a server cabinet with front glass doors, measuring 600x800 mm. It has a maximum load capacity of up to 1000 kg and is finished in black.
Plug with brush entry 380x380, sheet steel 1.5 mm powder enamel, color RAL 9005 black. With fixing elements.
4-point locking shelves - 19-inch mounting with adjustable shelf depth. Mounting on two pairs of 19-inch mounting profiles.
4-point locking shelves - 19” mounting with adjustable shelf depth.
3 894 грн
3 296 грн
Power cable with bracket and limit switch for SZB IT or DSR IT cabinet. Installed near the cabinet door. Depending on the wire connection method, pressing the button causes the circuit to be connected or disconnected. Can only be used in circuits with safe voltage. Scope of delivery: WN-0208-04-05-000-02. Limit switch, bracket, two screws.
Rollers for cabinets - type 300. For cabinets: SZB IT, DSR IT, SZE2 PC. For one cabinet, 2 rollers with a brake and two without a brake are used, as well as adapter plates for their fastening.
Universal 19” enclosure for modular electrical equipment. The set is equipped with DIN rail and protective cover with opening 402.5 x 45.5 mm.
Universal 19” enclosure for modular electrical equipment. The set is equipped with DIN rail and protective cover.
1 950 грн
1 625 грн
2 466 грн
1 969 грн
ZPAS LZ 42U mounting profile for socket blocks, black. Used for vertical installation of socket blocks in ZPAS floor-standing cabinets with a width of 800 mm.
Copper wires for connecting the removable elements of the enclosure to the ground bus, equipped with M8 screw terminals.
Cable organizers with perforated channel. Designed for horizontal cable organization in 19-inch cabinets and racks.
Cable organizers with rings. Designed for horizontal cable organization in 19-inch cabinets and racks. The T-SO-900-008 organizer has four rectangular cutouts for cable routing, protected by brush entries.
Fan panels PWD-4W and PWD-2W are designed for installation inside SZB IT and SZE2 PC floor cabinets and are fixed to the top panel of the cabinet in a standard opening (hatch) of 380 x 380 mm. The PD-2W fan panel can be installed in a hatch of 380 x 210 mm in the top panel of the SZB IT cabinet with a depth of 1000 mm.
The ZPAS 19", 1U Power Distribution Unit (PDU), 7xC13 with indicator and C14 plug, is a reliable solution for powering equipment in server and telecom racks. The 1U anodized aluminum body ensures durability and wear resistance. It features 7 C13 sockets for connecting servers, switches, and other devices.
The ZPAS 19", 1U Power Distribution Unit (PDU), 7xC13 with indicator and Schuko plug, is a reliable solution for powering equipment in server and telecom racks. The 1U anodized aluminum body ensures durability and wear resistance. It features 7 C13 sockets for connecting servers, switches, and other devices.
7 500 грн
5 774 грн
ZPAS 0U Power Distribution Unit, 560mm, vertical, 16A, 10xC13, 2xC19, 3m cable W-LZ16-70-00-000 features a durable aluminum and plastic housing with removable metal mounting brackets. It includes 10 C13 and 2 C19 outlets, and a 3-meter cable for efficient power distribution.
Power distribution unit ZPAS 19” 1U 9D Shuko without switch, plug C14. Removable metal mounting brackets. Possibility to install a bar for 4 positions.