D-Link Switch DGS-1008MP 9xGE PoE, 1xSFP, 125W Unmanaged Gigabit
Article:
DGS-1010MP
-
Security:CB, cUL, CCC, LVD
-
A type:Switch
-
Ports:1x 1000BaseX SFP, 8 x 10/100/1000BaseT PoE, 1 x 10/100/1000Base-T
-
Switch Type:unmanaged
-
Standards and Protocols:IEEE 802.3 10BASE-T, IEEE 802.3x Flow Control, IEEE 802.3az Energy-Efficient Ethernet (EEE), IEEE 802.3u 100BASE-TX, IEEE 802.1p QoS, IEEE 802.3at Power over Ethernet, IEEE 802.3af Power over Ethernet, IEEE 802.3z 1000BASE-X, Autonegotiation, IEEE 802.3ab 1000BASE-T, Auto MDI/MDIX support for 1000/10GBASE-T
-
Contents of delivery:Switch, Quick Setup Guide, Power cord, rubber feet, Installation kit, Power cord lock, Rack mounting brackets
-
Dimensions, mm:280 x 180 x 44
-
Transmission Method :Store-and-forward
-
Indicators:Link/Active/Speed (per port), Power Fail/Power Ok (per PoE port), Power supply, PoE Max
-
Data transfer rate:Ethernet: 10 Mbps (half duplex) / 20 Mbps (full duplex), Fast Ethernet: 100 Mbps (half duplex) / 200 Mbps (full duplex), Gigabit Ethernet: 2000 Mbps (duplex)
-
Switching matrix Gbit/sec:20
-
MAC Address Table k:4000
-
Jumbo frames byte:9216
-
Buffer Size Mbit:192
-
Power consumption in the standby mode W:2.81
-
Max. Power Consumption W:133.8
-
Network cables:10BASE-T: UTP cat. 3/4/5/5e (100 m max) /EIA/TIA-586 100 Ohm STP (100 m max), 100BASE-TX: UTP cat. 5/5e (100 m max) /EIA/TIA-568 100 Ohm STP (100 m max)
-
Power supply:100-240 V AC, 50-60 Hz
-
Heat dissipation BTU/h:456.55
-
Support PoE:Yes
-
PoE power budget W:125
-
Rack-mountable:Yes
-
Operating humidity:0% to 95%
-
Storage humidity:from 0% to 95%
-
MTBF (Mean Time Between Failures) h:250706
-
Storage temperature:from -40 to 70 °C
-
The weight g:1840
-
Forwarding Rate Mbit/sec:14.88
-
Cooling:passive
-
Operating temperature:from 0 to 40 °C
No reviews yet